Explosion - Proof Polygonal Galvanized Steel Tubular Pole / Straight Pole

सभी उत्पाद

स्टील पावर पोल (413)

विद्युत पावर (384)

जस्ती इस्पात ध्रुव (358)

पावर ट्रांसमिशन पोल्स (287)

स्टील यूटिलिटी पोल (213)

इस्पात ट्यूबलर ध्रुव (237)

यूटिलिटी पावर डंडे (286)

स्ट्रीट लाइट डंडे (163)

हाई मास्ट लाइट ध्रुव (151)

मोनो पोल टॉवर (80)

जस्ती कोण इस्पात (30)

ट्रैफिक लाइट ध्रुव (70)

कॉपर ग्राउंड रॉड (16)

बिजली के तारों और केबलों (15)

हाई मास्ट टॉवर (38)

आउटडोर बोर्ड विज्ञापन (15)

प्रमाणन

चीन Jiangsu milky way steel poles co.,ltd प्रमाणपत्र

Dear Sirs, Hereby we confirm that JiangSu MilkyWay steel poles co., ltd is our partner for several years. Since that time this company has shown itself as reliable supplier of qualitative products.We also would like to note that they provide top level service and all kinds of support.We plan to continue our fruitful cooperation co-operation for many years more.

—— Abacus

We do hereby certify the 69 KV transmmision line steel pole(from 25ft to 90 ft ) manufacuterd by Jiangsu Milky Way Steel Poles Co., Ltd since 2010.We are satisfied with their quality,service and the ways and attention they showed toward our order.

—— National Electricity Company

मैं अब ऑनलाइन चैट कर रहा हूँ

Explosion - Proof Polygonal Galvanized Steel Tubular Pole / Straight Pole

बड़ी छवि : Explosion - Proof Polygonal Galvanized Steel Tubular Pole / Straight Pole

उत्पाद विवरण:

उत्पत्ति के प्लेस:	China
ब्रांड नाम:	Milky Way
प्रमाणन:	/BV/ISO
मॉडल संख्या:	Polygonal tubular or lattice Galvanized Steel Pole for overheadline project

भुगतान & नौवहन नियमों:

न्यूनतम आदेश मात्रा:	one 40 HQ
मूल्य:	negotiation
पैकेजिंग विवरण:	as per customer request
प्रसव के समय:	usually 2 weeks after confirming
भुगतान शर्तें:	T/T
आपूर्ति की क्षमता:	300 pieces pole per day

संपर्क करें

विस्तृत उत्पाद विवरण

Suit for:	electricity distribution	Type:	straight pole, tensile pole, turn pole
Power:	10kv~550kv	Wind speed:	160km/h, 30m/s
tolerance:	+/-2%	Design Load in Kg:	300~ 1000 Kg applicated to 50cm from the to pole
हाई लाइट:	galvanised steel poles , steel transmission poles

Polygonal tubular or lattice Galvanized Steel Pole for overheadline project

COST ----- Install cost

The electrical part was designed can be installed within 6 minutes by using the non-screw connector, which definitely reduce your installation time and create lot of savings on the labor cost.

The arm was designed can be connected with the pole by two arc fixing plate with two long screws.

The new solar panel bracket was composed by sleeve, angle iron and U-steel fixed by screw, It is very easy to install and detach

The solar panel, controller, battery and lamp was connected together by a new developed wire harness

Minimum yield strength	355 mpa
Minimum ultimate tensile strength	490 mpa
Max ultimate tensile strength	620 mpa
Standard	ISO 9001
Length of per section	Within 14m once forming without slip joint
Welding	We has past flaw testing.Internal and external double welding makes the welding beautiful in shape Welding Standard :AWS ( American Welding Society ) D 1.1