Octagonal Multi Circuit 4mm Electric Steel Pole With Galvanization / Bitumen

 Octagonal multi circuit 4mm Electric Steel Pole with Galvanization and Bitumen
 
 Material
 All of our material are purchased from famous mill factory to assure the quality
 A mill certificate issued by the mill factory with stamp and signature must be provided before unload the  material in our factory ,otherwise we have our reason to refuse the material .
 Before put into production ,all the material must pass the chemical and physical analysis to make sure  that they have meet the requested strength and component.
 
 
 
Specifications:

 
 
 
 
 The information to inquiry or purchase
 -Steel pole height and force
 -Cross arm type and length,the position to install in the steel pole
 -The method to fix the cross arm(use bolt to connect or use one or two template to weld in the steel pole  to install the cross arm)
 -Safety factor of the steel pole
 -Wind speed
 -Type of climbing rung
 -Destination port
 -Other.
 Technical information-Cross Arm
 
 
  
 The above design is based on ASTMA 572 Gr 65 material,with octagonal cross section shape,while the  safety factor is 1.8.If you have other requirement on load,height,material and cross section shape,pls  contact us.
 
 
  More Project 
  This is the one of our project for Congo.