16 मीटर 18 मीटर की ऊँचाई शंक्वाकार विद्युत शक्ति ध्रुव 5 मिमी मोटाई एएसटीएम ए 123 गैल्वनाइजेशन मानक
Milky Way fabricates a variety of poles for the utility industry. These steel poles are designed and tested to ensure bend resistance, load capacity, and height all meet the requirements for the application of the tower. Anchored and/or direct embed styles available. General Notes: Manufacturer drawings available for all poles Poles can be modified to any configuration Transmission and distribution arms available for any requirements Additional surplus poles are in the
10m 11m 12m 11KV 13KV इलेक्ट्रिकल पावर स्टील पोल ट्रांसमिशन लाइन परियोजना
Specifications Material: Hot rolled steel, Q235,Q345,S235, or customized Pole’s height 3m –15m length Within 16m once forming without slip joint Wall thickness 2.5mm-20mm or optional Pole's Shape: Round, Polygonal, Octagonal, Conial Arm type: Single arm, Double arm, or as per cliens' request Application: road,avenue, street, expressway, park, square Temperature range -35 °C~+45 °C Max wind velocity Aganist wind pressure of 160Km/h Base plate mounted Base plate is square,
8m 11kv 13kv इलेक्ट्रिकल पावर स्टील पोल ट्रांसमिशन लाइन प्रोजेक्ट बिटुमेन के साथ
Specifications Material: Hot rolled steel, Q235,Q345,S235, or customized Pole’s height 3m –15m length Within 16m once forming without slip joint Wall thickness 2.5mm-20mm or optional Pole's Shape: Round, Polygonal, Octagonal, Conial Arm type: Single arm, Double arm, or as per cliens' request Application: road,avenue, street, expressway, park, square Temperature range -35 °C~+45 °C Max wind velocity Aganist wind pressure of 160Km/h Base plate mounted Base plate is square,
50 फीट 60 फीट 1000 किलो 450Mpa न्यूनतम उपज तनाव विद्युत शक्ति पोल, क्रॉस आर्म गैल्वेनाइज्ड स्टील पोल
Specification: Material: Hot rolled steel, Q235,Q345,S235,S355,SS400,Gr 50 Yield strength of Material: Minimum yield strength>=235n/mm2 for Q235, S235 and SS400 Minimum yield strength>=345n/mm2 for Q345 S355 and Gr 50 Pole’s height: 3m –15m Length of one part Within 16m once forming without slip joint Wall thickness: 2.3mm-30mm Pole's Shape Can be made: Round, Polygonal, Taper Octagonal, Taper round, Round conical, Taper Square, Square. Arm type can be made: Single arm,
9 मीटर 200दान 400दान 650दान गैल्वेनाइज्ड ट्रांसमिशन इलेक्ट्रिकल मेटल पोल डिस्ट्रीब्यूशन लाइन के लिए
Mechanical Property The metal supports are designed to withstand the nominal force F and the pressure of the wind V applied at 0.25m from the top. Under these loads, the safety factor with respect to the elastic limit of the steel is larger than 1.8. The post also resists a torque equal to (F+V) ×1m. Tests shows the load intervened when breaking is around 2 times of design load. Galvanization Standard: NFA91121 Average thickness of the galvanization: Not less than 70 Place of
35FT 70FT 90FT ट्रांसमिशन लाइन पावर ट्रांसमिशन के लिए बिटुमेन के साथ जस्ती स्टील पावर पोल
35FT 70FT 90FT Transimission Line Octagonal Galvanized Steel Power Pole With Bitumen Specifications: Types Length 45ft 50ft 55ft 60ft 65ft 70ft 13.75m 15.25m 16.80m 18.30m 19.85m 21.35m B ( 0°-2°) Top diameter (mm) 200 200 200 200 200 200 Butt diameter (mm) 345 370 395 415 435 455 Thickness (mm) 6 6 6 6 6 6 E ( 2°-15°) Top diameter (mm) 200 200 200 200 200 200 Butt diameter (mm) 545 585 625 660 700 740 Thickness (mm) 6 6 6 6 6 6 C ( 15°-30°) Top diameter (mm) 250 250 250 250
11विद्युत संचरण के लिए NFA35503 मानक गैल्वनाइजेशन के साथ.8m 800 daN स्टील पावर पोल
11.8m 800 daN Cameroon Hot Dip Galvanization Steel Power Pole For Electrical Transmission Steel The material is in accordance with NF EN 10025 Standard and NF EN 10149 Standard,it has the following property. -Yield Strength=355N/mm2 -Toughness remains the same under 20 degrees below zero. -Galvanization is in accordance with NFA35503 Standard Class 1. Specification: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material
विद्युत वितरण और संचरण के लिए उच्च शक्ति वाले स्टील पावर पोल
Steel Tubular Pole for Electricity Power Transmissionand Distribution Line Steel The material is in accordance with NF EN 10025 Standard and NF EN 10149 Standard,it has the following property. -Yield Strength=355N/mm2 -Toughness remains the same under 20 degrees below zero. -Galvanization is in accordance with NFA35503 Standard Class 1. Specification: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually Q345B/A572
बिजली उपयोगिता और संचरण के लिए 45FT स्टील पावर पोल Q345 स्टील सामग्री और माउंटिंग ऊंचाई के साथ
45FT NEA Standard Steel Power Utility Pole 69kv Transmission Line Metal Power Poles Specifications Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per
