| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit For | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding Standard | AWS D1.1 |
| Standard | ISO 9001 |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| प्रकार | सीधे ध्रुव, तन्यता का खंभा, बारी ध्रुव |
|---|---|
| सूट के लिए | बिजली वितरण |
| आकृति | कोनोइड, बहु-पिरामिड, कॉलिफॉर्म, बहुभुज या शंक्वाकार |
| वेल्डिंग मानक | एडब्ल्यूएस डी 1.1 |
| सहिष्णुता | / -2% |
| Design of pole | against earthquake of 8 grade |
|---|---|
| Power | 10kv~550kv |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Power | 10kv~550kv |
| Wind speed | 160km/h, 30m/s |
| Suit for | electricity distribution |
| सामग्री | उपज ताकत 345mpa से कम नहीं है |
|---|---|
| आवेदन | बिजली वितरण |
| मोटाई | 2.5-10mm |
| आकार | बहुभुज |
| बिजली से धातु चढ़ाने की क्रिया | एएसटीएम A123, औसत सहवास 85um से कम नहीं है |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| प्रकार | सीधे पोल, तन्यता पोल, मोड़ पोल |
|---|---|
| के लिए सूट | बिजली वितरण |
| आकार | शंकु, बहु-पिरामिड, स्तंभकार, बहुभुज या शंक्वाकार |
| वेल्डिंग मानक | AWS D1.1 |
| सहनशीलता | +/- 2% |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
