सभी श्रेणियाँ
transmission line poles
90 पाए गए आइटम
110kv Steel Utility Pole Electric Light Pole For Electrical Dsitribution Line
110kv Steel Utility Pole Electric Light Pole For Electrical Dsitribution Line Milky Way fabricates a variety of poles for the utility industry. These steel poles are designed and tested to ensure bend resistance, load capacity, and height all meet the requirements for the application of the tower. Anchored and/or direct embed styles available. General Notes: Manufacturer drawings available for all poles Poles can be modified to any configuration Transmission and distribution
8KN 10m Distribution Power Line Steel Transmission Pole With 3mm Thickness
10m 8KN Electrical Power Pole For Distribution Power Line With 3mm Thickness Factory Estbilsed in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV transmission
11kv 33kv Power Distribution Transformer Electric Steel Poles With Cross Arm
11kv 33kv power distribution transformer electric Steel Utility Pole with corss arm Introduction Available height 5-80m Electric pressure 10kv--550kv Material Q345B/A572,minimum yield strength>=345MPA, Q235B/A36,minimum yield strength>=235MPA Galvanized Hot dip galvanization,thickness is>=12um Delivery lead time 30 days after receiving 30% deposit Lifetime Minimum 25 years Structure Overlap connection/Flange connection Galvanizing standard EN ISO 146,ASTM/A123 Manufacturing
Round Tapered Galvanised Steel Power Transmission Poles / Electrical Power Pole
Round Tapered Galvanised Steel Power Transmission Poles For Electrical Power Transmission Lines Power Distribution Poles are required especially in populated areas where these poles are favoured because they require less space than lattice towers and are more acceptable visually. Weighing of the steel made Power Distribution poles is approximately 50-70% less than comparable wood structures, the steel poles are easier and less expensive to handle and install.Design of the
12m Hot Dip Galvanization , Double Circuit Steel Power Pole For Electrical Transmission
12m hot dip galvanization,double circuit steel power pole for electrical transmission Steel The material is in accordance with NF EN 10025 Standard and NF EN 10149 Standard,it has the following property. -Yield Strength=355N/mm2 -Toughness remains the same under 20 degrees below zero. -Galvanization is in accordance with NFA35503 Standard Class 1. Specification: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually
7.5 एम लाइट 1 केएन लोड स्टील पावर पोल, पावर ट्रांसमिशन पोल 450 एमपीए न्यूनतम यील्ड तनाव
7.5M Light 1KN Load Steel Power Pole , Power Transmission Pole 450Mpa Min Yield Stress Factory Estbilsed in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV
8 मीटर 5KN Q345 इलेक्ट्रिक स्टील ट्रांसमिशन पोल गैल्वनीकरण 30 मीटर / एस विंड स्पीड
8m 5KN utility pole high quality Q345 electric pole Africa bid Material: Hot rolled steel, Q235,Q345,S235, or customized Pole’s height 8m length Within 16m once forming without slip joint Wall thickness 2.5mm-20mm or optional Pole's Shape: Round, Polygonal, Octagonal, Conial Arm type: Single arm, Double arm, or as per cliens' request Application: road,avenue, street, expressway, park, square Production Process Raw material test-cutting-bending-welding-dimension verify-flange
220kv जस्ती पावर ट्रांसमिशन ट्यूबलर स्टील पोल
220kv Galvanized Power Transmission Pole Electric Steel Tubular Tower Pole Steel The material is in accordance with NF EN 10025 Standard and NF EN 10149 Standard,it has the following property. -Yield Strength=355N/mm2 -Toughness remains the same under 20 degrees below zero. -Galvanization is in accordance with NFA35503 Standard Class 1. Specification: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually Q345B/A572
स्थिर संचरण के लिए 18 मीटर के इस्पात उपयोगिता पोल के साथ 33kV पावर लाइन टॉवर
18m steel utility pole power line pole For 33kv transmission line steel pole tower Specifications: series Outside Diametar Wall Thicness Plain and Tubes mm Min. mm /SWG Kg./M Mtrs./Ton 15 L 21.3 2 0.947 1058 M 2.6 1.21 826 H 3.2 1.44 694 20 L 26.9 2.3 1.38 725 M 2.6 1.56 641 H 3.2 1.87 535 25 L 33.7 2.6 1.98 505 M 3.2 2.41 415 H 4 2.93 341 32 L 42.4 2.6 2.54 394 M 3.2 3.1 323 H 4 3.79 264 40 L 48.3 2.9 3.23 310 M 3.2 3.56 281 H 4 4.37 229 50 L 60.3 2.9 4.08 245 M 3.6 5.03 199
